pulsarlube_m_page 2019-07-24T16:47:18+00:00

ELECTROMECHANICAL


Pulsarlube M

The Pulsarlube M consists of a vertical feed pump and a microprocessor chip allowing an average operating pressure of 30bar(435psi). It is designed to ensure reliable lubrication and at the same time reduce lubrication expenses with cost-saving Service Packs.

icon

The Pulsarlube M electromechanical automatic grease lubricator is primarily designed to compensate for the performance of conventional gas type automatic grease lubricator. It also offers superior advantages in cost competitiveness and user-friendliness.

The Pulsarlube M consists of a vertical self-priming pump, microprocessor control system, and large LCD display. This product is ideal for applications where: considerable back pressure in lube line exists, a precise lubrication is required, or a disposable gas type lubricator is not economical.

30bar

Up to 8 lube points for multi-point installation
Max. 10m (30ft) for single point

-40℃

Optional Lithium Battery Pack available for low temperature usage

PRODUCT INFO

30bar

Up to 8 lube points for multi-point / Max. 10m (33ft) for single point

-40°C

Optional Lithium Battery Pack available for low temperature usage

LCD

Easy to program with built-in LCD and simple button controls

Service Pack

Substantial savings from the use of replaceable grease pouches and battery packs

Technical Specifications

SPECDescription
Grease Pouch Capacity60ml/125ml/250ml/500ml (replaceable)
Power SupplyDC 4.5V Battery Pack
Operating Pressure30~60bar (435~870psi)
Operating TemperatureStandard Alkaline Battery :
-15˚C~60˚C (5 ˚F~140˚F)
Optional Lithium Battery :
-40˚C~60˚C (-40 ˚F~140˚F)
Dispensing Periods60ml : 1~12 month
125ml/250ml : 1, 2, 3, 6, 12 month & H (15 days)
500ml : 1, 2, 4, 6, 12, 18, 24 month & H (15 days)
Remote Installation Max. 10m (33ft) with O.D. Ø6 tube
Multi-Point InstallationMax. 6m (20ft) with O.D. Ø6 tube (Up to 8 lube points)
IP CodeIP54
Product CertificationsCE
Packaging10 Units/Case

Product Certifications

CertificationDescription
IP CodeIP54
CE / Etc.CE(CoC)
Part No.ImageDESCRIPTION
A001Reducer, 3/8"F X 1/4"M Adaptor (Brass)
A002-SReducer, 3/8"F x 1/8"M Adaptor (Steel)
A002Reducer, 3/8"F x 1/8"M Adaptor (Brass)
A011Socket, 1/4"F x 1/4"F Adaptor (Brass)
A012Socket, 1/8"F x 1/8"F Adaptor (Brass)
A01990° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
A020 90° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A021 90° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02290° Elbow, 1/8”M X1/8”F Adaptor (Brass)
A023 45° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A024 45° Elbow, 1/8”M X 1/8”F Adaptor (Brass)
A106Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109 Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)
A121Pipe,1/4”M X 1/4”M × 50mm (Steel)
A122 Pipe,1/4”M X 1/4”M × 100mm (Steel)
A123Pipe,1/4”M X 1/4”M × 150mm (Steel)
A124 Pipe,1/4”M X 1/4”M × 200mm (Steel)
A212-1Distribution Tubing, O.D. 5/16”(8mm) Urethan Tubing, 3ft Pre-filled with (Grease Type)
A214-1Distribution Tubing, O.D. 1/4”(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
A240 Tube Fitting, Push-In Type, PC6-PT1/8”M
B002Mounting Bracket, "L"Shape
B051Self Drilling Screw, #8 x 20
B057Washer
B058Tooth Washer
A243Thread Converter, PT1/8"F X NPT1/8"M (Brass)
HU Type Divider BlockHU-2RS, Grease Type, 2 Ports
HU-3RS, Grease Type, 3 Ports
HU-4RS, Grease Type, 4 Ports
HU-5RS, Grease Type, 5 Ports
HU-6RS, Grease Type, 6 Ports
HU-7RS, Grease Type, 7 Ports
HU-8RS, Grease Type, 8 Ports

Applications

POWER PLNAT

- Electric Motors

- Blowers

- Fans

COOLING TOWER

- Pumps

- Fans

- Blowers

STEEL INDUSTRY

- Water Pumps

- Conveyors System

- Electric Motors

- Boilers

Reducer

Part No.DESCRIPTION
A001Reducer, 3/8"F X 1/4"M Adaptor (Brass)
A002Reducer, 3/8"F X 1/8"M Adaptor (Brass)
A002-SReducer, 3/8"F X 1/8"M Adaptor (Brass)

Socket + Pipe + Reducer

Part No.DESCRIPTION
A011Socket, 1/4"F x 1/4"F Adaptor (Brass)
A012Socket, 1/8"F x 1/8"F Adaptor (Brass)
Part No.DESCRIPTION
A121Pipe,1/4”M X 1/4”M × 50mm (Steel)
A122Pipe,1/4”M X 1/4”M × 100mm (Steel)
A123Pipe,1/4”M X 1/4”M × 150mm (Steel)
A124Pipe,1/4”M X 1/4”M × 200mm (Steel)
Part No.DESCRIPTION
A106Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107Pipe, 1/8"M x 1/8"M x 150mm for divider Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)

45˚ Elbow

Part No.DESCRIPTION
A02345° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02445° Elbow, 1/8”M X 1/8”F Adaptor (Brass)

90˚ Elbow

Part No.DESCRIPTION
A01990° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
A02090° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A02190° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02290° Elbow, 1/8”M X1/8”F Adaptor (Brass)

If the bearing lube point is NPT, use the thread converter (A243) to convert thread metric to inch for bearing zerk (USA only)

Comments

1. All Parts should be assembled tightly with PTFE tape.
2. For optimal performance with remote installation kits, using an NLGI #1 grade grease is recommended.
3. If the bearing lube point is NPT, use the thread converter.

Kit No. 1250RC-1

Part No.DESCRIPTION
A002Reducer, 3/8"F X 1/8"M Adaptor (Brass)
B002Mounting Bracket, “L”Shape
B051Self Drilling Screw, #8ⅹ20
B057Washer
A012Socket, 1/8”F x 1/8”F Adaptor (Brass)
A240Tube Fitting, Push-In Type, PC6-PT1/8”M
A214-1Distribution Tubing, O.D. 1/4"(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
A243Thread Converter, PT1/8"F X NPT1/8"M (Brass)

Note : For remote installation using a tube, use an 8mm O.D. (5/16″) tubing pre-filled with the same or compatible grease as the grease contained in the unit. Recommend using under short dispensing period settings due to powerful dispensing pressure.

 

Electromechanical Products using a divider block ( up to 8 points )

ListPart No.DescriptionQ'TY
1A002Reducer, 3/8″F X 1/8″M Adaptor (Brass) 1
2B002Mounting Bracket, “L”Shape 1
3B051Self Drilling Screw, #8ⅹ20 1
4HU-2RS ~ HU-8RSHU Type Divider Block, Grease Type, 2 Ports ~ 8 Ports 1
5B058Tooth Washer 2
6A240Tube Fitting, Push-In Type, PC6-PT1/8”M 3
7A214-1Distribution Tubing, O.D. 1/4″(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type) 1
8A243Thread Converter, PT1/8″F X NPT1/8″M (Brass) 1