pulsarlube_exp_page 2019-02-25T19:59:04+00:00

ELECTROMECHANICAL


Pulsarlube EXP/EXPL

The Pulsarlube EXP/EXPL is a specifically designed electromechanical lubricator for the exclusive use in all applications where the explosion-proof certified devices must be used under all explosive gases or dusts exisitng environments.

The Pulsarlube EXP/EXPL electromechanical automatic grease lubricator is the industry's first highest explosion-proof certified in industry and can be used safely in the area classified as danger zone. It boasts the best operating pressure(60bar) among existing explosion proof single point automatic lubricator and it excels at cost savings using an economical service pack that can be easily replaced. The circuits and parts of the Pulsarlube EXP/EXPL are designed based on the energy limitation concept by adopting a non-sparking, explosion-proof structure that keeps an electrical device from sparking an explosive gas whether it is working under normal or certain abnormal condition.

Certification

The Industry’s first highest explosion-proof certified lubricator

60bar

The best operating pressure (60bar) among existing explosion proof single point automatic lubricator

PRODUCT INFO

60bar

The best operating pressure (60bar) among existing explosion proof single point automatic lubricator

IP65

IP65 – dust tight and protected against water jets

Global Explosion Proof Certificat

The Industry’s first highest explosion-proof certified lubricator designed for safe use in the area classified as danger zone

Service Pack

Substantial savings with the use of replaceable grease pouches and battery packs

Technical Specifications

SPECDescription
Grease Pouch Capacity60ml/120ml/240ml/480ml
(pre-set)
Power SupplyDC 4.5V Battery Pack (replaceable)
Standard : Alkaline Battery
Optional : Lithium Battery
Operating Pressure30~60bar (435~870psi)
Operating TemperatureEXP : 0˚C~50˚C (32°F~122°F)
EXPL : -15˚C~50˚C (5°F~122°F)
Dispensing Periods60ml : 1~12 month
120ml~480ml : 1, 2, 3, 6, 9, 12 month
Remote Installation Max. 6m (20ft) with Ø6 tube
Multi-Point InstallationLithium Battery : Max. 3m (10ft) with Ø6 tube (Up to 8 lube points)
Packaging10 Units/Case
IP CodeIP65
CertificationsEXP : ATEX, KCs, IECEx, NEPSI, TS, CE
EXPL : ATEX, KCs, IECEx, NEPSI, ETL, CE

Product Certifications

CertificationDescription
IP CodeIP65
ATEXEXP : II 3 G Ex ic IIC T5/T4 Gc
EXPL : II 3 G Ex ic IIB T4 Gc
KCsEXP : Ex ic IIC T5/T4
EXPL : Ex ic IIB T4
CE / Etc.CE
IECExEXP : Ex ic IIC T5/T4 Gc
EXPL : Ex ic IIB T4 Gc
NEPSIEXP : Ex ic IIC T5/T4 Gc
EXPL : Ex ic IIB T4 Gc
TSEXP : Ex ic IIC T5/T4 GC
ETLEXPL : Cl.Ⅰ, Div. 2, Gps A, B, C, & D, T4
Cl. II, Div. 2 ,Gps F ,G, T4
Part No.ImageDESCRIPTION
A001Reducer, 3/8"F X 1/4"M Adaptor (Brass)
A002-SReducer, 3/8"F x 1/8"M Adaptor (Steel)
A002Reducer, 3/8"F x 1/8"M Adaptor (Brass)
A011Socket, 1/4"F x 1/4"F Adaptor (Brass)
A012Socket, 1/8"F x 1/8"F Adaptor (Brass)
A01990° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
A020 90° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A021 90° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02290° Elbow, 1/8”M X1/8”F Adaptor (Brass)
A023 45° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A024 45° Elbow, 1/8”M X 1/8”F Adaptor (Brass)
A106Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109 Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)
A121Pipe,1/4”M X 1/4”M × 50mm (Steel)
A122 Pipe,1/4”M X 1/4”M × 100mm (Steel)
A123Pipe,1/4”M X 1/4”M × 150mm (Steel)
A124 Pipe,1/4”M X 1/4”M × 200mm (Steel)
A212-1Distribution Tubing, O.D. 5/16”(8mm) Urethan Tubing, 3ft Pre-filled with (Grease Type)
A214-1Distribution Tubing, O.D. 1/4”(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
A240 Tube Fitting, Push-In Type, PC6-PT1/8”M
B002Mounting Bracket, "L"Shape
B051Self Drilling Screw, #8 x 20
B057Washer
B058Tooth Washer
A243Thread Converter, PT1/8"F X NPT1/8"M (Brass)
HU Type Divider BlockHU-2RS, Grease Type, 2 Ports
HU-3RS, Grease Type, 3 Ports
HU-4RS, Grease Type, 4 Ports
HU-5RS, Grease Type, 5 Ports
HU-6RS, Grease Type, 6 Ports
HU-7RS, Grease Type, 7 Ports
HU-8RS, Grease Type, 8 Ports

Application

POWER PLANT

- Electric Motors

- Electric Motors

- Pumps

- Air/Gas Compressors

- Fans & Blowers

THERMOELETRIC POWER PLANT

- Electric Motors

- Water Pumps

- Conveyer Systems

- Electric Motors

- Boilers

- Blowers

- Pumps

Reducer

Part No.DESCRIPTION
A001Reducer, 3/8"F X 1/4"M Adaptor (Brass)
A002Reducer, 3/8"F X 1/8"M Adaptor (Brass)
A002-SReducer, 3/8"F X 1/8"M Adaptor (Brass)

Socket + Pipe + Reducer

Part No.DESCRIPTION
A011Socket, 1/4"F x 1/4"F Adaptor (Brass)
A012Socket, 1/8"F x 1/8"F Adaptor (Brass)
Part No.DESCRIPTION
A121Pipe,1/4”M X 1/4”M × 50mm (Steel)
A122Pipe,1/4”M X 1/4”M × 100mm (Steel)
A123Pipe,1/4”M X 1/4”M × 150mm (Steel)
A124Pipe,1/4”M X 1/4”M × 200mm (Steel)
Part No.DESCRIPTION
A106Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107Pipe, 1/8"M x 1/8"M x 150mm for divider Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)

45˚ Elbow

Part No.DESCRIPTION
A02345° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02445° Elbow, 1/8”M X 1/8”F Adaptor (Brass)

90˚ Elbow

Part No.DESCRIPTION
A01990° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
A02090° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A02190° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02290° Elbow, 1/8”M X1/8”F Adaptor (Brass)

If the bearing lube point is NPT, use the thread converter (A243) to convert thread metric to inch for bearing zerk (USA only)

Comments

1. All Parts should be assembled tightly with PTFE tape.
2. For optimal performance with remote installation kits, using an NLGI #1 grade grease is recommended.
3. If the bearing lube point is NPT, use the thread converter.

Kit No. 1250RC-1

Part No.DESCRIPTION
A002Reducer, 3/8"F X 1/8"M Adaptor (Brass)
B002Mounting Bracket, “L”Shape
B051Self Drilling Screw, #8ⅹ20
B057Washer
A012Socket, 1/8”F x 1/8”F Adaptor (Brass)
A240Tube Fitting, Push-In Type, PC6-PT1/8”M
A214-1Distribution Tubing, O.D. 1/4"(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
A243Thread Converter, PT1/8"F X NPT1/8"M (Brass)

Note : For remote installation using a tube, use an 8mm O.D. (5/16″) tubing pre-filled with the same or compatible grease as the grease contained in the unit. Recommend using under short dispensing period settings due to powerful dispensing pressure.

 

Electromechanical Products using a divider block ( up to 8 points )

ListPart No.DescriptionQ'TY
1A002Reducer, 3/8″F X 1/8″M Adaptor (Brass) 1
2B002Mounting Bracket, “L”Shape 1
3B051Self Drilling Screw, #8ⅹ20 1
4HU-2RS ~ HU-8RSHU Type Divider Block, Grease Type, 2 Ports ~ 8 Ports 1
5B058Tooth Washer 2
6A240Tube Fitting, Push-In Type, PC6-PT1/8”M 3
7A214-1Distribution Tubing, O.D. 1/4″(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type) 1
8A243Thread Converter, PT1/8″F X NPT1/8″M (Brass) 1