The Pulsarlube BT Bluetooth-Enabled Automatic Electromechanical Lubricator.
The Pulsarlube BT is a Bluetooth-enabled automatic lubricator that could be monitored and controlled by a mobile devices in near field (5~20m) without access to lubricators.
All lubricators could be recognized in wireless detection range, so monitoring the lubricator operation status (overload, low battery, dispensing completion, remaining grease volume and cartridge replacement date) and finding lubricators. Besides, the information of mobile app is shared with WAS (web application server) regarding all lubricators in work place. As the BLE (Battery Low Energy) 4.1 module is applied, lubricator operation is very reliable for a long time even though battery pack is used for a power. Also, installation outside is allowed by waterproof and protection against dust (IP65).
The Pulsarlube BT is developed to advance precise lubrication technology and convenient maintenance for a lot of lubricators.
Easily monitor nearby lubricators within a close proximity of your mobile (proximity pairing)
Possible to change mode settings while lubricators are in operation
Integrated DB Management
Easily share DB between mobile device and server
|Grease Pouch Capacity||60ml / 120ml / 240ml (pre-set)|
|Power Supply||DC 4.5V Battery Pack|
|Operating Pressure||30~60bar (435~870psi)|
|Operating Temperature||Standard Alkaline Battery : -5˚C ~ 60˚C (23°F ~ 140°F)
Optional Lithium Battery : -20˚C ~ 60˚C (-4°F ~ 140°F)
|Dispensing Periods||1 ~ 12 month|
|Remote Installation||Max. 6m (20ft) with Ø6 tube|
|Multi-Point Installation||Max. 3m (10ft) with Ø6 tube (Up to 8 lube points)|
|Product Certifications||CE / KC / FCC / RCM / NCC / SRRC / SIG|
|Detection Range||5 ~ 20m depending on installation environment|
|Bluetooth Specifications||Bluetooth 4.1 (class 2)|
|NCC||60 : CCAH19LP0122T6
120 : CCAH19LP0121T4
240 : CCAH19LP0120T2
|SRRC||BT60 CMIIT ID : 2019DJ0846
BT120 CMIIT ID : 2019DJ0847
BT240 CMIIT ID : 2019DJ1090
|A001||Reducer, 3/8"F X 1/4"M Adaptor (Brass)
|A002||Reducer, 3/8"F X 1/8"M Adaptor (Brass)
|A002-S||Reducer, 3/8"F X 1/8"M Adaptor (Brass)
Socket + Pipe + Reducer
|A011||Socket, 1/4"F x 1/4"F Adaptor (Brass)
|A012||Socket, 1/8"F x 1/8"F Adaptor (Brass)
|A121||Pipe,1/4”M X 1/4”M × 50mm (Steel)
|A122||Pipe,1/4”M X 1/4”M × 100mm (Steel)
|A123||Pipe,1/4”M X 1/4”M × 150mm (Steel)
|A124||Pipe,1/4”M X 1/4”M × 200mm (Steel)
|A106||Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
|A107||Pipe, 1/8"M x 1/8"M x 150mm for divider Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
|A108||Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
|A109||Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)
|A023||45° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
|A024||45° Elbow, 1/8”M X 1/8”F Adaptor (Brass)
|A019||90° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
|A020||90° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
|A021||90° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
|A022||90° Elbow, 1/8”M X1/8”F Adaptor (Brass)
If the bearing lube point is NPT, use the thread converter (A243) to convert thread metric to inch for bearing zerk (USA only)
1. All Parts should be assembled tightly with PTFE tape.
2. For optimal performance with remote installation kits, using an NLGI #1 grade grease is recommended.
3. If the bearing lube point is NPT, use the thread converter.
Kit No. 1250RC-1
|A002||Reducer, 3/8"F X 1/8"M Adaptor (Brass)|
|B002||Mounting Bracket, “L”Shape|
|B051||Self Drilling Screw, #8ⅹ20|
|A012||Socket, 1/8”F x 1/8”F Adaptor (Brass)|
|A240||Tube Fitting, Push-In Type, PC6-PT1/8”M
|A214-1||Distribution Tubing, O.D. 1/4"(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
|A243||Thread Converter, PT1/8"F X NPT1/8"M (Brass)
Note : For remote installation using a tube, use an 8mm O.D. (5/16″) tubing pre-filled with the same or compatible grease as the grease contained in the unit. Recommend using under short dispensing period settings due to powerful dispensing pressure.
Electromechanical Products using a divider block ( up to 8 points )
|1||A002||Reducer, 3/8″F X 1/8″M Adaptor (Brass)||1|
|2||B002||Mounting Bracket, “L”Shape||1|
|3||B051||Self Drilling Screw, #8ⅹ20||1|
|4||HU-2RS ~ HU-8RS||HU Type Divider Block, Grease Type, 2 Ports ~ 8 Ports||1|
|6||A240||Tube Fitting, Push-In Type, PC6-PT1/8”M||3|
|7||A214-1||Distribution Tubing, O.D. 1/4″(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)||1|
|8||A243||Thread Converter, PT1/8″F X NPT1/8″M (Brass)||1|