product_s_page 2019-05-02T18:18:19+00:00

SPRING


Pulsarlube S

The Pulsarlube S Unique and Ingenious Design.

icon

The Pulsarlube S is an advanced spring type lubricator operates with the spring at the bottom and an upward piston movement, which dramatically reduces the effects of oil separation that have plagued traditional spring type lubricators.

Design

The upward piston movement reduces oil separation and the possibility of grease hardening

Control Knob

Grease dispensing rate can be easily controlled by using the control knob

PRODUCT INFO

Design

The upward piston movement reduces oil separation and the possibility of grease hardening

Control Knob

Grease dispensing rate can be easily controlled by using the control knobs

Easy to Refill

Easy to refill grease on site using grease nipple

Pre-Filled

Available pre-filled

Technical Specifications

SPECDescription
Grease Capacity100ml (refillable)
Operating MethodSpring
Operating PressureN/A
Operating Temperature-23℃~121℃ (-9°F~250°F)
Dispensing Periods5 Dial Settings
Remote Installation N/A
Multi-Point InstallationN/A
Packaging10 Units/Case

Product Certifications

CertificationDescription
IP CodeN/A
Etc.N/A
Part No.ImageDESCRIPTION
A001Reducer, 3/8"F X 1/4"M Adaptor (Brass)
A002-SReducer, 3/8"F x 1/8"M Adaptor (Steel)
A002Reducer, 3/8"F x 1/8"M Adaptor (Brass)
A011Socket, 1/4"F x 1/4"F Adaptor (Brass)
A012Socket, 1/8"F x 1/8"F Adaptor (Brass)
A01990° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
A020 90° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A021 90° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02290° Elbow, 1/8”M X1/8”F Adaptor (Brass)
A023 45° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A024 45° Elbow, 1/8”M X 1/8”F Adaptor (Brass)
A106Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109 Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)
A121Pipe,1/4”M X 1/4”M × 50mm (Steel)
A122 Pipe,1/4”M X 1/4”M × 100mm (Steel)
A123Pipe,1/4”M X 1/4”M × 150mm (Steel)
A124 Pipe,1/4”M X 1/4”M × 200mm (Steel)
A212-1Distribution Tubing, O.D. 5/16”(8mm) Urethan Tubing, 3ft Pre-filled with (Grease Type)
A239Tube Fitting, Push-In Type, PC8-PT1/8"M
B002Mounting Bracket, "L"Shape
B051Self Drilling Screw, #8 x 20
B057Washer
A243Thread Converter, PT1/8"F X NPT1/8"M (Brass)

Applications

FANS

- Bearings

- Motors

Reducer

Part No.DESCRIPTION
A003Reducer, 3/8"F x 1/8"M Adaptor (Steel)
A004Reducer, 1/4"F x M8ⅹ1.25 M Adaptor (Steel)
A005Reducer, 1/4"F x 1/8" M Adaptor (Brass)

Socket + Pipe + Reducer

Part No.DESCRIPTION
A011Socket, 1/4"F x 1/4"F Adaptor (Brass)
A012Socket, 1/8"F x 1/8"F Adaptor (Brass)
Part No.DESCRIPTION
A121Pipe,1/4”M X 1/4”M × 50mm (Steel)
A122Pipe,1/4”M X 1/4”M × 100mm (Steel)
A123Pipe,1/4”M X 1/4”M × 150mm (Steel)
A124Pipe,1/4”M X 1/4”M × 200mm (Steel)
Part No.DESCRIPTION
A106Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107Pipe, 1/8"M x 1/8"M x 150mm for divider Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)

45˚ Elbow

Part No.DESCRIPTION
A02345° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02445° Elbow, 1/8”M X 1/8”F Adaptor (Brass)

90˚ Elbow

Part No.DESCRIPTION
A01990° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
A02090° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A02190° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02290° Elbow, 1/8”M X1/8”F Adaptor (Brass)

If the bearing lube point is NPT, use the thread converter (A243) to convert thread metric to inch for bearing zerk (USA only)

Comments

1. All Parts should be assembled tightly with PTFE tape.
2. For optimal performance with remote installation kits, using an NLGI #1 grade grease is recommended.
3. If the bearing lube point is NPT, use the thread converter.