product_plc_page 2019-03-20T15:16:58+00:00

ADVANCED FEATURES


Pulsarlube PLC

The Pulsarlube PLC is specially designed to be fully integrated with a PLC system and offered in two types; MONTH and INTERVAL type.

The Pulsarlube PLC electromechanical automatic grease lubricator is specially designed to be fully integrated as well as be synchronized to a PLC system .Kindly offers two types of PLC lubricator, Month and Interval type for wider range of usage.

For Month type, dispensing interval is calculated based on the lubricator and discharges only when the machine is in operation.

For interval type, dispensing interval is calculated by PLC and provides the selective modes for discharging a predefined lubricant amount. Pulsarlube PLC is ideal for lubricating a wide variety of robots, conveyors, roller-slide bearing, motor shaft seals, generators, pumps, fans and many other linear guide systems. In case of any malfunctioning, it allows the user to manage and obtain necessary data of the lubricator remotely from a central control unit (PLC panel) without having to go on-site.

PLC Control

Programmed to deliver fresh lubricant upon receiving a signal from the PLC

Convenient

Both NPN and PNP connections are available

Communication

In case of any warning messages, the unit sends out a signal to an external alarm

2 Types

MON type dispenses at predetermined intervals and rates depending on the monthly setting selected. INT type dispenses on command when a signal is received from the PLC, at the rate selected by the user.

PRODUCT INFO

PLC Control

Programmed to deliver fresh lubricant upon receiving a signal from the PLC

Communication

In case of any warning messages, the unit sends out a signal to an external alarm

Service Pack

Substantial savings from the use of replaceable grease pouches and battery packs (Service Pack)

Convenient

Both NPN and PNP connections are available

2 Types

MON type dispenses at predetermined intervals and rates depending on the monthly setting selected.INT type dispenses on command when a signal is received from the PLC, at the rate selected by the user.

Technical Specifications

SPECDescription
Grease Pouch Capacity60ml/120ml/240ml/480ml (pre-set)
Power SupplyExternal Power Supply
Operating Pressure30~60bar (435~870psi)
Operating Temperature-20˚C~60˚C (-4˚F~140˚F)
Dispensing PeriodsMONTH type : 1~12 month
INTERVAL type : 1, 2, 3…6 Mode
Remote Installation Max. 10m (33ft) with O.D. Ø6 tube
Multi-Point InstallationMax. 6m (20ft) with O.D. Ø6 tube (Up to 8 lube points)
Product CertificationsCE, KC
1 Per Stroke(@20˚C)MONTH type : 0.34ml / Stroke (@20˚C)
INTERVAL type : 0.34ml x Mode selected (@20˚C)
Wire Length• To Lubricator : 150mm (0.5ft)
• Extra connecting wires available for Purchase
Packaging10 Units/Case

Product Certifications

CertificationDescription
IP CodeIP65
CE CodeEN 61000-6-4:2007/A1:2011, EN 61000-6-2:2005
KCMSIP-REM-KLT-PLC480
Part No.ImageDESCRIPTION
A001Reducer, 3/8"F X 1/4"M Adaptor (Brass)
A002-SReducer, 3/8"F x 1/8"M Adaptor (Steel)
A002Reducer, 3/8"F x 1/8"M Adaptor (Brass)
A011Socket, 1/4"F x 1/4"F Adaptor (Brass)
A012Socket, 1/8"F x 1/8"F Adaptor (Brass)
A01990° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
A020 90° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A021 90° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02290° Elbow, 1/8”M X1/8”F Adaptor (Brass)
A023 45° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A024 45° Elbow, 1/8”M X 1/8”F Adaptor (Brass)
A106Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109 Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)
A121Pipe,1/4”M X 1/4”M × 50mm (Steel)
A122 Pipe,1/4”M X 1/4”M × 100mm (Steel)
A123Pipe,1/4”M X 1/4”M × 150mm (Steel)
A124 Pipe,1/4”M X 1/4”M × 200mm (Steel)
A212-1Distribution Tubing, O.D. 5/16”(8mm) Urethan Tubing, 3ft Pre-filled with (Grease Type)
A214-1Distribution Tubing, O.D. 1/4”(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
A240 Tube Fitting, Push-In Type, PC6-PT1/8”M
B002Mounting Bracket, "L"Shape
B051Self Drilling Screw, #8 x 20
B057Washer
B058Tooth Washer
A243Thread Converter, PT1/8"F X NPT1/8"M (Brass)
HU Type Divider BlockHU-2RS, Grease Type, 2 Ports
HU-3RS, Grease Type, 3 Ports
HU-4RS, Grease Type, 4 Ports
HU-5RS, Grease Type, 5 Ports
HU-6RS, Grease Type, 6 Ports
HU-7RS, Grease Type, 7 Ports
HU-8RS, Grease Type, 8 Ports

Application

AUTOMOTIVE & LINEAR GUIDES

- Chains

- Lifts

- Electric Motors

- HVAC Systems

- Linear Guides

- Conveyors Loaders

Connection to PLC equipment
(For both models, MONTH type & INTERVAL type)

Connection to External Power Supply (DC Adapter)
(MONTH type only)

INSTALLATION MANUAL DOWNLOAD

PLC LADDER PROGRAM (INTERVAL)
PLC LADDER PROGRAM (MONTH)