product_ol_page 2019-02-21T13:23:25+00:00


Pulsarlube OL500

The Pulsarlube OL 500 is our latest innovation in oil lubrication with an average operating pressure of 10bar.

The Pulsarlube OL500 oil lubricator consists of the main body with a vertical self-priming pump controlled by the microprocessor, a 500ml oil reservoir, and a battery pack. This product has the ability to precisely deliver very small amounts of lubricant with selectable intermittent dispensing cycle. The volume of output is adjustable from 0.70ml to 33.4ml/day, equivalent to the service period of Half month to 24months for the 500ml oil reservoir. It is available with up to 4 feeds by using optional installation kits.

NOTE : The Pulsarlube OL500 is a reusable unit but the battery pack must be replaced when each dispensing period set is complete.

Accessory Kit

Easy to Refill





High operating pressure with a wide range of acceptable oil viscosity

Accessory Kit

Up to 4 lube points for multi-point / Max. 6m (20ft) for a single point

Easy Refill

Refillable oil reservoir


Easy to program with built-in LCD and simple button controls

Technical Specifications

Oil Reservoir Capacity500ml (refilliable)
Power SupplyDC 4.5V Battery Pack
Operating Pressure10bar (145psi) (depending on oil viscosity)
Operating TemperatureStandard Alkaline Battery : -15˚C~60˚C (5˚F~140˚F)
Dispensing Periods1, 2, 4, 6, 12, 18, 24 month & H (15 days)
Remote Installation Max. 6m (20ft) with O.D. Ø4 tube
Multi-Point InstallationMax. 3m (10ft) with O.D. Ø4 tube (Up to 4 lube points)
Oil Viscosity Range100~10,000 cSt@40˚C
* Special instructions available for 10~100 cSt@40˚C
IP CodeIP54
Packaging10 Units/Case

Product Certifications

IP CodeIP54
A002Reducer, 3/8"F X 1/8"M Adaptor (Brass)
A002-SReducer, 3/8"F x 1/8"M Adaptor (Steel)
A012Socket, 1/8"F x 1/8"F Adaptor (Brass)
A020 90° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A02290° Elbow, 1/8”M X1/8”F Adaptor (Brass)
A024 45° Elbow, 1/8”M X 1/8”F Adaptor (Brass)
A106Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109 Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)
B002Mounting Bracket, "L"Shape
B051Self Drilling Screw, #8 x 20
C003-1Distributor, 3(1P) M8 x 1P
C003-2Distributor, 4(2P) M8 x 1P
C003-3Distributor, 5(3P) M8 x 1P
C003Distributor, 6(4P) M8 x 1P
C004Resistance Valve, #1 Distributor Spray
C005Plug, M8 x 1P
C006Reducer, PT 1/8"F X M8 X 1P
C007Tube Fitting, Dia. 4mm x PT1/8"M
C009Sleeve Ring, Dia. 4mm
C010Tube Clamp, Dia. 4mm x 1R
C011Insert, Dia. 4mm x 2.5mm
C021-1Distribution Tubing, O.D. 4mm x I.D. 2.5mm Nylon Tubing, 10ft
C021-2Distribution Tubing, O.D. 4mm x I.D. 2.5mm Nylon Tubing, 20ft
C021-3Distribution Tubing, O.D. 4mm x I.D. 2.5mm Nylon Tubing, 30ft
C021-4Distribution Tubing, O.D. 4mm x I.D. 2.5mm Nylon Tubing, 40ft



- Chains

- Electric Motors

Kit No. 1250RO-1

A002Reducer, 3/8"F X 1/8"M Adaptor (Brass)
B002Mounting Bracket, “L”Shape
A012Socket, 1/8”F x 1/8”F Adaptor (Brass)
C021-1O.D. 4mm Nylon Tubing (Clear), 10ft
C010Tube Clamp, Dia. 4mm x 1R
C007Tube Fitting, Dia. 4mm x PT1/8"M
C011 Insert, Dia. 4mm x 2.5mm
C009Sleeve Ring, Dia. 4mm

Kit No. 1250RC2~4

ListPart No.DescriptionAvailable Kits &
Component Parts
1OL UnitAvailable SeparatelySold separately
2A002Reducer, 3/8"F X 1/8"M Adaptor (Brass)1EA
3B002Mounting Bracket, "L"Shape1EA
5B051Self Drilling Screw, #8ⅹ207EA9EA11EA
6C006Reducer, PT 1/8"F X M8 X 1P1EA
7C003-1Distributor, 3 (1P) M8 x 1P1EA--
8C003-2Distributor, 4 (2P) M8 x 1P-1EA-
9C003-3Distributor, 5 (3P) M8 x 1P--1EA
10C004Resistance Valve, #1 Distributor Spray2EA3EA4EA
11C021-2Distribution Tubing, O.D. 4mm x I.D. 2.5mm
Nylon Tubing, 20ft (6m)
12C021-3Distribution Tubing, O.D. 4mm x I.D. 2.5mm
Nylon Tubing, 30ft (9m)
13C021-4Distribution Tubing, O.D. 4mm x I.D. 2.5mm
Nylon Tubing, 40ft (12m)
14C010Tube Clamp, Dia. 4mm x 1R4EA6EA8EA
15C007Tube Fitting, Dia. 4mm x PT1/8"M2EA3EA4EA
16C011Insert, Dia. 4mm x 2.5mm2EA3EA4EA
17C009Sleeve Ring, Dia. 4mm4EA6EA8EA
18Cable Tie4EA6EA8EA