product_ms_msp_page 2019-02-21T15:40:35+00:00

ADVANCED FEATURES


Pulsarlube MS&MSP

The Pulsarlube MS & MSP units offer the advantage of providing automatic lubrication to machinery that is infrequently or intermittently used by synchronizing itself to the equipment, thereby avoiding the problem of over lubrication.

The Pulsarlube MS electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MS will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. If the equipment is not operating, then the Pulsarlube MS goes into "stand-by mode" and does not dispense lubricant until the machine goes back into operation.

The Pulsarlube MSP electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MSP will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. Unlike the Pulsarlube MS, this product is a machine synchronized, externally powered unit and the power supply connected to the machine or PLC powers the unit. It is not necessary to replace the battery pack in the unit up to 5 years but the grease pouch should still be replaced after completion of each lubrication cycle set.

Synchronized

Dispenses a preset amount of lubricant only when equipment is in operation Synchronized which prevents over lubrication

Max 60bar

Up to 8 lube points for multi-point installation Max. 10m (30ft) for single point

PRODUCT INFO

Synchronized

Dispenses a preset amount of lubricant only when equipment is in operation, Synchronized which prevents over lubrication

Max bar

Up to 8 lube points for multi-point / Max. 10m (33ft) for single point

Lcd

Easy to program with built-in LCD and simple button controls

Service Pack

Substantial savings from the use of replaceable grease pouches and battery packs (Service Pack)

Technical Specifications

SPECDescription
Grease Pouch Capacity60ml/125ml/250ml/500ml
(replaceable)
Power SupplyMS : DC 4.5V Battery Pack
MSP : External Power Supply
Operating Pressure30~60bar (435~870psi)
Operating TemperatureStandard Alkaline Battery :
-15˚C~60˚C (5˚F~140˚F)
Optional Lithium Battery :
-40˚C~60˚C (-40˚F~140˚F)
Dispensing Periods60ml : 1~12 month
125ml/250ml : 1, 2, 3, 6, 12 month & H (15 days)
500ml : 1, 2, 4, 6, 12, 18, 24 month & H (15 days)
Remote Installation Max. 10m (33ft) with O.D. Ø6 tube
Multi-Point InstallationMax. 6m (20ft) with O.D. Ø6 tube
(Up to 8 lube points)
Packaging10 Units/Case

Product Certifications

CertificationDescription
IP CodeN/A
Etc.N/A

MSP Relay / MSP Power Supply Specification

 

 MS MSP MSP
Relay VAC VDC
Voltage Rate Input Range AC100-480V, 0.5W/50~60Hz AC Adaptor (100~220V) DC-DC Convertor (12~24V)
Voltage Rate Output RangeSignal (Open collector type)5.0V, 2A5.0V, 2A
Power ON IndicatorRed LEDRed LEDRed LED
Relay Box Dimensions85mm (D) x 49mm (W) x 32mm (H)85mm (D) x 49mm (W) x 32mm (H)85mm (D) x 49mm (W) x 32mm (H)
Wire LengthInput 1m (3ft) / Output 4m (13ft)Input 1m (3ft) / Output 4m (13ft)Input 1m (3ft) / Output 4m (13ft)
Part No.ImageDESCRIPTION
A001Reducer, 3/8"F X 1/4"M Adaptor (Brass)
A002-SReducer, 3/8"F x 1/8"M Adaptor (Steel)
A002Reducer, 3/8"F x 1/8"M Adaptor (Brass)
A011Socket, 1/4"F x 1/4"F Adaptor (Brass)
A012Socket, 1/8"F x 1/8"F Adaptor (Brass)
A01990° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
A020 90° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A021 90° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02290° Elbow, 1/8”M X1/8”F Adaptor (Brass)
A023 45° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A024 45° Elbow, 1/8”M X 1/8”F Adaptor (Brass)
A106Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109 Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)
A121Pipe,1/4”M X 1/4”M × 50mm (Steel)
A122 Pipe,1/4”M X 1/4”M × 100mm (Steel)
A123Pipe,1/4”M X 1/4”M × 150mm (Steel)
A124 Pipe,1/4”M X 1/4”M × 200mm (Steel)
A212-1Distribution Tubing, O.D. 5/16”(8mm) Urethan Tubing, 3ft Pre-filled with (Grease Type)
A214-1Distribution Tubing, O.D. 1/4”(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
A240 Tube Fitting, Push-In Type, PC6-PT1/8”M
B002Mounting Bracket, "L"Shape
B051Self Drilling Screw, #8 x 20
B057Washer
B058Tooth Washer
A243Thread Converter, PT1/8"F X NPT1/8"M (Brass)
HU Type Divider BlockHU-2RS, Grease Type, 2 Ports
HU-3RS, Grease Type, 3 Ports
HU-4RS, Grease Type, 4 Ports
HU-5RS, Grease Type, 5 Ports
HU-6RS, Grease Type, 6 Ports
HU-7RS, Grease Type, 7 Ports
HU-8RS, Grease Type, 8 Ports

Application

SEMICONDUCTOR & MACHINE TOOL

- Web Scrubbers

- Air Handing Units

- Clean Rooms

- Cooling Towers

- SMD PLB Lines

- LCD Panels

- Loader Robots

Reducer

Part No.DESCRIPTION
A001Reducer, 3/8"F X 1/4"M Adaptor (Brass)
A002Reducer, 3/8"F X 1/8"M Adaptor (Brass)
A002-SReducer, 3/8"F X 1/8"M Adaptor (Brass)

Socket + Pipe + Reducer

Part No.DESCRIPTION
A011Socket, 1/4"F x 1/4"F Adaptor (Brass)
A012Socket, 1/8"F x 1/8"F Adaptor (Brass)
Part No.DESCRIPTION
A121Pipe,1/4”M X 1/4”M × 50mm (Steel)
A122Pipe,1/4”M X 1/4”M × 100mm (Steel)
A123Pipe,1/4”M X 1/4”M × 150mm (Steel)
A124Pipe,1/4”M X 1/4”M × 200mm (Steel)
Part No.DESCRIPTION
A106Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107Pipe, 1/8"M x 1/8"M x 150mm for divider Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)

45˚ Elbow

Part No.DESCRIPTION
A02345° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02445° Elbow, 1/8”M X 1/8”F Adaptor (Brass)

90˚ Elbow

Part No.DESCRIPTION
A01990° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
A02090° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A02190° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02290° Elbow, 1/8”M X1/8”F Adaptor (Brass)

If the bearing lube point is NPT, use the thread converter (A243) to convert thread metric to inch for bearing zerk (USA only)

Comments

1. All Parts should be assembled tightly with PTFE tape.
2. For optimal performance with remote installation kits, using an NLGI #1 grade grease is recommended.
3. If the bearing lube point is NPT, use the thread converter.

Kit No. 1250RC-1

Part No.DESCRIPTION
A002Reducer, 3/8"F X 1/8"M Adaptor (Brass)
B002Mounting Bracket, “L”Shape
B051Self Drilling Screw, #8ⅹ20
B057Washer
A012Socket, 1/8”F x 1/8”F Adaptor (Brass)
A240Tube Fitting, Push-In Type, PC6-PT1/8”M
A214-1Distribution Tubing, O.D. 1/4"(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
A243Thread Converter, PT1/8"F X NPT1/8"M (Brass)

Note : For remote installation using a tube, use an 8mm O.D. (5/16″) tubing pre-filled with the same or compatible grease as the grease contained in the unit. Recommend using under short dispensing period settings due to powerful dispensing pressure.

 

Electromechanical Products using a divider block ( up to 8 points )

ListPart No.DescriptionQ'TY
1A002Reducer, 3/8″F X 1/8″M Adaptor (Brass) 1
2B002Mounting Bracket, “L”Shape 1
3B051Self Drilling Screw, #8ⅹ20 1
4HU-2RS ~ HU-8RSHU Type Divider Block, Grease Type, 2 Ports ~ 8 Ports 1
5B058Tooth Washer 2
6A240Tube Fitting, Push-In Type, PC6-PT1/8”M 3
7A214-1Distribution Tubing, O.D. 1/4″(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type) 1
8A243Thread Converter, PT1/8″F X NPT1/8″M (Brass) 1