product_mi_page 2019-05-10T15:02:42+00:00

ADVANCED FEATURES


Pulsarlube Mi

Pulsarlube Mi operates only when vibration is detected on the installed application.

icon

The Pulsarlube Mi automatic grease lubricator is innovatively designed to detect the operation of industrial rotational machinery by using a piezoelectric vibration sensor. This piezoelectric sensor is composed of a ceramic strain transducer attached to a metallic proof mass in order to respond to an externally imposed acceleration. The Pulsarlube Mi periodically checks the operating status of the machinery which it is attached to.

As the Pulsarlube Mi receives a vibration signal from the machinery, the unit will dispense an adequate amount of fresh lubricant in line with the operation of machinery. If there is no vibration signal detected, the unit will automatically go into stand-by mode to avoid the problems involving over-lubrication.

No Wire

No need for external electric wiring to motors or other power cables

Simple & Precise

No need for external electric wiring to motors or other power cables

Vibration Sensor

No need for external electric wiring to motors or other power cables

Service Pack

Substantial savings from the use of replaceable grease pouches and battery packs (Service Pack)

PRODUCT INFO

Vibration Sensor

Vibration sensor allows the unit to lubricate only when the application is operating

No Wire

No need for external electric wiring to motors or other power cables

Simple & Precise

Simple to operate & dispenses precise amounts of lubricant reliably

Service Pack

Substantial savings from the use of replaceable grease pouches and battery packs

Technical Specifications

SPECDescription
Power SupplyDC 4.5V Battery Pack
Grease Pouch Capacity60ml/125ml/250ml (replaceable)
Operating Pressure30~60bar (435~870psi)
Operating TemperatureStandard Alkaline Battery : -15˚C~60˚C (5˚F~140˚F)
Optional Lithium Battery : -40˚C~60˚C (-40˚F~140˚F)
Dispensing Periods1~12 month
Remote Installation Max. 1m (3.3ft) with O.D. Ø6 tube
Multi-Point InstallationMax. 1m (3.3ft) with O.D. Ø6 tube (Up to 2 lube points)
Vibration DetectorPiezoelectric Cantilever-type
Film Sensor
• Adjustable Sensitivity Range
Wire Length• To Lubricator : 150mm (0.5ft)
• Sensor Cable : 1.2m (4ft)
Product CertificationsCE, KCs
Packaging10 Units/Case

Product Certifications

CertificationDescription
CENo. : TA 385-17-2671
KCMSIP-REM-KLT-MI250
Part No.ImageDESCRIPTION
A001Reducer, 3/8"F X 1/4"M Adaptor (Brass)
A002-SReducer, 3/8"F x 1/8"M Adaptor (Steel)
A002Reducer, 3/8"F x 1/8"M Adaptor (Brass)
A011Socket, 1/4"F x 1/4"F Adaptor (Brass)
A012Socket, 1/8"F x 1/8"F Adaptor (Brass)
A01990° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
A020 90° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A021 90° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02290° Elbow, 1/8”M X1/8”F Adaptor (Brass)
A023 45° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A024 45° Elbow, 1/8”M X 1/8”F Adaptor (Brass)
A106Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109 Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)
A121Pipe,1/4”M X 1/4”M × 50mm (Steel)
A122 Pipe,1/4”M X 1/4”M × 100mm (Steel)
A123Pipe,1/4”M X 1/4”M × 150mm (Steel)
A124 Pipe,1/4”M X 1/4”M × 200mm (Steel)
A212-1Distribution Tubing, O.D. 5/16”(8mm) Urethan Tubing, 3ft Pre-filled with (Grease Type)
A214-1Distribution Tubing, O.D. 1/4”(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
A240 Tube Fitting, Push-In Type, PC6-PT1/8”M
B002Mounting Bracket, "L"Shape
B051Self Drilling Screw, #8 x 20
B057Washer
B058Tooth Washer
A243Thread Converter, PT1/8"F X NPT1/8"M (Brass)
HU Type Divider BlockHU-2RS, Grease Type, 2 Ports
HU-3RS, Grease Type, 3 Ports
HU-4RS, Grease Type, 4 Ports
HU-5RS, Grease Type, 5 Ports
HU-6RS, Grease Type, 6 Ports
HU-7RS, Grease Type, 7 Ports
HU-8RS, Grease Type, 8 Ports

Applications

POWER PLANT

- Electric Motors

- Blowers

- Fans

Reducer

Part No.DESCRIPTION
A001Reducer, 3/8"F X 1/4"M Adaptor (Brass)
A002Reducer, 3/8"F X 1/8"M Adaptor (Brass)
A002-SReducer, 3/8"F X 1/8"M Adaptor (Brass)

Socket + Pipe + Reducer

Part No.DESCRIPTION
A011Socket, 1/4"F x 1/4"F Adaptor (Brass)
A012Socket, 1/8"F x 1/8"F Adaptor (Brass)
Part No.DESCRIPTION
A121Pipe,1/4”M X 1/4”M × 50mm (Steel)
A122Pipe,1/4”M X 1/4”M × 100mm (Steel)
A123Pipe,1/4”M X 1/4”M × 150mm (Steel)
A124Pipe,1/4”M X 1/4”M × 200mm (Steel)
Part No.DESCRIPTION
A106Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107Pipe, 1/8"M x 1/8"M x 150mm for divider Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)

45˚ Elbow

Part No.DESCRIPTION
A02345° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02445° Elbow, 1/8”M X 1/8”F Adaptor (Brass)

90˚ Elbow

Part No.DESCRIPTION
A01990° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
A02090° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A02190° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02290° Elbow, 1/8”M X1/8”F Adaptor (Brass)

If the bearing lube point is NPT, use the thread converter (A243) to convert thread metric to inch for bearing zerk (USA only)

Comments

1. All Parts should be assembled tightly with PTFE tape.
2. For optimal performance with remote installation kits, using an NLGI #1 grade grease is recommended.
3. If the bearing lube point is NPT, use the thread converter.

Kit No. 1250RC-1

Part No.DESCRIPTION
A002Reducer, 3/8"F X 1/8"M Adaptor (Brass)
B002Mounting Bracket, “L”Shape
B051Self Drilling Screw, #8ⅹ20
B057Washer
A012Socket, 1/8”F x 1/8”F Adaptor (Brass)
A240Tube Fitting, Push-In Type, PC6-PT1/8”M
A214-1Distribution Tubing, O.D. 1/4"(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
A243Thread Converter, PT1/8"F X NPT1/8"M (Brass)

Note : For remote installation using a tube, use an 8mm O.D. (5/16″) tubing pre-filled with the same or compatible grease as the grease contained in the unit. Recommend using under short dispensing period settings due to powerful dispensing pressure.

 

Electromechanical Products using a divider block ( up to 8 points )

ListPart No.DescriptionQ'TY
1A002Reducer, 3/8″F X 1/8″M Adaptor (Brass) 1
2B002Mounting Bracket, “L”Shape 1
3B051Self Drilling Screw, #8ⅹ20 1
4HU-2RS ~ HU-8RSHU Type Divider Block, Grease Type, 2 Ports ~ 8 Ports 1
5B058Tooth Washer 2
6A240Tube Fitting, Push-In Type, PC6-PT1/8”M 3
7A214-1Distribution Tubing, O.D. 1/4″(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type) 1
8A243Thread Converter, PT1/8″F X NPT1/8″M (Brass) 1